Prism
Systems
The prism system of a binocular
reduces the size needed to contain a
long optical path and turns what
would be an upside-down image
right-side-up. There are two types
of prism systems, roof and porro.
Roof
Prism System
In roof prism binoculars the prisms
overlap closely, allowing the
objective lenses to line up directly
with the eyepiece. The result is a
slim, streamlined shape in which the
lenses and prisms are in a straight
line. Roof prism binoculars are less
bulky and more rugged than an
equivalent porro model.
Porro
Prism System
In porro prism binoculars the
objective or front lens is offset
from the eyepiece. Porro prism
binoculars provide greater depth
perception and generally offer a
wider field-of-view. Because of the
simplicity of this system, some of
the best values can be with a porro
design.
Waterproof/Fogproof
Some binoculars are O-ring sealed
and nitrogen-purged for total
waterproof and fogproof protection.
These models can withstand complete
immersion in water and stay dry
inside. The interior optical
surfaces won’t fog due to rapid
temperature change or humidity.
Magnification (Power)
Binoculars are often referred to by
two
numbers separated by an "x". For
example: 8x32. The first number is
the power or magnification of the
binocular. With an 8x32 binocular,
the object being viewed appears to
be eight times closer than you would
see it with the unaided eye.
Objective
Lens Size
The second number in the formula
(8x32) is the diameter of the
objective or front lens. The larger
the objective lens, the more light
that enters the binocular and the
brighter the image.
Prism Glass
Most optical prisms are made from
borosilicate (BK-7) glass or barium
crown (BaK-4) glass. BaK-4 is the
higher quality glass yielding
brighter images and high
edge-to-edge sharpness.
Coated
Optics
Lens surface coatings reduce light
loss and glare due to reflection for
a brighter, higher-contrast image
with less eyestrain.
Types of
Coatings:
Coated – A single layer on at least
one lens surface.
Fully Coated – A single layer on all
air-to-glass surfaces.
Multi-Coated – Multiple layers on at
least one lens surface.
Fully Multi-Coated – Multiple layers
on all air-to-glass surfaces.
Field-of-View (F.O.V.)
The side-to-side measurement of the
circular viewing field or subject
area. It is defined by the width in
feet or meters of the area visible
at 1000 yards or meters. A
wide-angle binocular features a wide
field-of-view and is better for
following action. Generally, the
higher the magnification, the
narrower the field-of-view.
Resolution
Resolution, or definition, is the
ability of a binocular to
distinguish fine detail and retain
clarity.
Exit Pupil
Refers to the size of the circle of
light visible at the eyepiece of a
binocular. The larger the exit
pupil, the brighter the image. To
determine the size, divide the
objective lens diameter by the power
(an 8x32 model has an exit pupil of
4mm).
Eye Relief
The distance a binocular can be held
away from the eye and still present
the full field-of-view. Extended or
long eye relief reduces eyestrain
and is ideal for eyeglass wearers.
Eyeglass
Wearers – Eyecups
Bushnell® binoculars come with
twist-up, pop-up or soft rubber fold
down eyecups which go down for
eyeglass wearers. These options
allow everyone to see the entire
field-of-view.
Diopter
Adjustment
A "fine focus" adjustment ring
usually provided around one eyepiece
to accommodate for vision
differences between the right and
left eyes.
Rainguard
(available only on select Bushnell
binoculars)®
Our exclusive, patented, hydrophobic
(water-repellent) coating on which
condensation from rain, fog or snow
forms in much smaller droplets than
on standard coatings. Smaller
droplets scatter less light, which
results in increased light
transmission and a clearer image.
Makes the binocular useful even when
looking directly into the driving
rain.
PC-3® Phase
Coating
Found on the best roof prism
binoculars, this chemical coating is
applied to the prisms to enhance
resolution and contrast. Would not
provide an advantage on porro prism
models.
Rubber
Armor
Rubber armor provides multiple
benefits. It helps protect the
binocular from the bumps and
scratches that come with day-to-day
use. It provides a comfortable
gripping surface for making them
easier to hold on to. It's easy to
wipe clean after a tough day in the
field. And it suppresses noise if
the binocular bumps aluminum or
other non-rubber surfaces, which
might otherwise spook wildlife |